PRODUCTS QUALITY ORDER/QUERY FORM
CT 59.

Beam or Prism Moulds Per IS 269 (4031) (For Shrinkage Test) Made of steel plate

(i) 1x1x10 inch or 250 mm single unit
(ii) 1x1x10 inch or 250 mm gang of three in one ALSEC make
CT 60.

Moulds Beams complete with Base Plate (IS 516-1959) Made of Mild steel plate or cast iron

100 x 100 x 500 mm
150 x 150 x 700 mm
40 x 40 x 160 mm
ALSEC Make

CT 61. Mould Cement Mortor size 2.78" or 7.06 cm (C.I.) split type
CT 62. Mould Vicate with clamping ring of steel (Mould Vicat)
CT 63. Mould Briquette Gun Metal or Brass casting as per IS 269

(i) Single
(ii) Gang of three in one
CT 64. Mould Le-Chatlier as per IS 269/4031. ALSEC Make
CT 65.

Measuring Cylinderical (Steel Sheet) Per IS 2386 or IS 2720 capacity 3 litres

15 Litres
30 Litres
CT 66.

Measuring Metal Cylinder

Capacity 10 Litres
Capacity 20 Litres

CT 67. Mixing Apparatus 5 Lit. cap. Motorised Planatory type action.
ALSEC make
CT 68. Magnet Holer (Dial) Indian
CT 69. Mallet Rubber
(a) Big
(b) Small
CT 70. Multiposition Strain Gauge with Dial Gauge
CT 71.

Needle Vibrator (Motorised) Internal Vibrator, ALSEC Make

(a) Standard size 1" dia x 12"
(b) Large size 1.1/4" dia x 15" long
All Alsec make
CT 72. Penetrometer Consistency as per IS 4031/1727
CT 73. Penetrometer Mortar (Pocket type)
CT 74. Penetrometer Pocket (for Soils) ALSEC make
CT 75.

Permeability Appartus for concrete single unit without Air Compressor

(a) 150mm dia cell
(b) For three cell unit
CT 76. Pulverizer Laboratory with 3 HP Motor, ALSEC Make
CT 77. Reaction Container IS 2386 (vi) made of S.Steel cap. 55 ml
CT 78.

Riffle Sample Divider, ALSEC Make

(a) Small (13mm to 20mm)
(b) Large (25mm to 40mm)
CT 79. Sample Divider Rotating as per IS spec (Motorised) I.S. 1607
CT 80.

Sample Divider Rifle (Manual)

(a) Small
(b) Large
CT 81. Sand ABSORPTION Cone & Temper
CT 82. Shrinkage Bar Moulds Single made of steel, 25 x 25 x 250 MM
(b) Three gang
CT 83. Slum Cone with tamping rod and foot rule. ALSEC make
CT 84. Slump Cone Test Apparatus as per ISS 1199-1959 'K' type
CT 85. Spatula standard IS 269
CT 86. Southard Viscometer IS 712 for Lime Putty
CT 87. Strain Gauge (Multiposition)
CT 88. Tamping rod
CT 89. Tamping Bar 25 x 25 mm square x 40 cm ht.
CT 90. Tensile Strength Tester Hand IS 269 for cement Briquette ALSEC make
CT 91. Tensile Strength Tester Motorised IS 269
Next >>