PRODUCTS QUALITY ORDER/QUERY FORM

CT 1. Abrasion Testing Machine (Los Angles) as per IS 2386 (iv) (Pamphlet attached) operation 450 volts AC, ALSEC Make
CT 2. Abrasion Testing Machine (Tiles), with Dial gauge
CT 3. Abrasion Testing Machine (Dorry)
CT 4. Abrasion Cone & Temper
CT 5. Aggregate Impact Tester per IS 2386 (Pt. IV) (Without Blow counter) ALSEC
CT 6.

Aggregate Crushing Value Apparatus (Per IS 2386)

(a) 3" size (75 mm )
(b) 6" size (150 mm)
(c) 12" size (300 mm)
CT 7. Aggregate Impact Tester with Blow counter ALSEC Make
CT 8.

Aggregate Measure

(a) 3 Lt. capacity
(b) 5 Lt. capacity
(c) 15 Lt. capacity
(d) 30 Lt. capacity
CT 9. Air Meter ( Air Entrain Meter ) capacity 0.005 cu.m. Per IS 1199
CT 10.

Autoclave for glazed tiles & Cement per IS 4031/777 (special quality)

(b) Autoclave, routine quality As per IS 269/4031/777 ALSEC Make
CT 11. Beam Testing Machine (Hand operated) capacity5000kgs/10,000 Kg. Hydraulic System.
CT 12. Beam Testing Machine (Electrically operated) Hydraulic System capacity5000kgs./10,000 Kgs.
CT 13.

Briquette Testing Machine (Hand operated) Per IS 269 with 10 kg. lead shots ALSEC Make
CT 14.

Briquette Testing Machine (Elect. operated)
CT 15. Briquette Mould with base Plate Single Unit, Gun Metal
CT 16. Briquette Mould with Base Plate in gang of three
CT 17. Caliper for Flow Table
CT 18. Caping Set Vertical Per A.S.T.M.
CT 19. Capling Set (Horizontal) Per A.S.T.M.
CT 20. Compaction Factor Appartus Per IS1199 with accessories
CT 21. Compaction Mould and Hammer Per IS 2720 (All Steel)
CT 22. Compressometer for 15 cm dia x 30 cm long concrete cylinder with dial gauge .001" or .002 mm
CT 23. Concrete Mixer Laboratory capacity 1.5 cu. ft. Motorised ALSEC Make
CT 24. Concrete Testing Hammer Medium size in carrying case
CT 25. Concrete Permeability Appartus Per IS, Single Cell 6" size (without Air compressor)
CT 26.

Compression Testing Machine (Hand operated) ALSEC Make

(a) Channel Model with pressure gauge 6" dial duly caliberated

(i) Capacity 25 Tons
(ii) Capacity 50 Tons
(iii) Capacity 100 Tons
(iv) Capacity 150 Tons
(v) Capacity 200 Tons
ALL ALSEC Make

(b) Two Pillars Model with separate pumping unit & pressure gauge

(i) Capacity 25 Tons (Metric)
(ii) Capacity 50 Tons (Metric)
(iii) Capacity 100 Tons (Metric)
(iv) Capacity 150 Tons (Metric)
(v) Capacity 200 Tons (Metric)
ALL ALSEC Make

(c) Motorised cum Hand Model Compression testing machine with automatic cut-off & with speed control ALSEC make one year guarantee

(i) Capacity 25 Tons
(ii) Capacity 50 Tons
(iii) Capacity 100 Tons
(iv) Capacity 150 Tons
(v) Capacity 200 Tons